| Willson Full Mask Optifit |
 Easiest on and off with its exclusive twist and seal design. Just twist the QuickDial™ and the contoured cradle adjusts for an effective seal – every time. No clumsy straps. No hair snagging. No wasted time. NIOSH approved. Medical grade silicone face seal for comfortable secure fit. |
| Manufactured by: Willson |
| 3M Half Face Piece 6000 Series |
 The economical choice to either keep or toss. Facepiece is made from soft, lightweight thermoplastic elastomer. Available with a standard or drop-down head harness option. Drop-down model allows wearers to lower the respirator without removing hardhat or faceshield. Head harness assembly and spare parts available. Simple and convenient—minimal training required. Pre-assembled with permanently attached cartridges; no maintenance necessary. Face piece made from soft, lightweight thermoplastic elastomer. Ideally suited for Intermittent respirator use Plant shutdowns and turnarounds. Dirty applications where respirators wear out or become difficult to clean in a short time |
| Manufactured by: Willson |
| 3M Chemical Cartirage 6000 Series |
 Low-profile design helps maintaingood field of vision. |
| Manufactured by: Willson |
| 3M 8210, General Industrial Respirator |
 3M 8210, General Industrial Respirator NIOSH Approval TC-84A-0007 Filter Class N95. Nose Clip Standard. Cool Flow Valve No, Face Seal No, Approved Dust/Mist Maintenance Free. Package 20 . |
| Manufactured by: 3M (USA) . |
| 3M 8212, Particulate Welding Respirator |
 3M 8212, Particulate Welding Respirator. NIOSH Approval TC-84A-0454. Filter Class N95. Nose Clip Standard. Cool Flow Valve, Face Seal, Exhalation Valve, For Particulates Without Oil Aerosols. With Adjustable Strap. Package 10. |
| Manufactured by: 3M (USA) |
| Survivair Escape Breathing Apparatus |
 5- 10 Min duration Hood equipped with elastic drawstring and large, adjustable opening. Resistance to temperature extremes. Anti – fog film is permanently laminated to inside panel of hood. Constant flow rate is permanently laminated to inside panel of hood. Constant flow rate over entire duration of unit. Spring-reinforced breathing tube. Detachable regulator. Refillable Cylinders. Lightweight aluminium cylinder construction. Abrasion-resistant, fully encapsulating nylon carry pouch. |
| Manufactured by: FENZY (France) |
| BIO-S-CAPE Emergency Escape Breathing Apparatus |
 Two breaking through innovations make the BIO-S-CAPE the safest EEBA of his generation .Working principle: The air contained in the cylinder is released immediately at the opening of the bag , a constant flow is then inflating the hood. A whistle will indicate imminent end of the air reserve . Reducer materials : High-pressure brass, nickel-plated. Reducing system: Piston/spring type, built-in safety valve Starting : Fully automatic triggering device at the opening of bag cover. Working pressure : 300 bar (but delivered with a 200 bar connector). Airflow : Adjustable by flow limitation screw (by authorized persons only) Pressure Gauge : Constant reading, fixed on the reducer, visible all the time. |
| Manufactured by: FENZY (France) |
| AERIS line |
 Modular and adaptable, the AERIS line covers all the requirements of every user of Open-Circuit Isolating Breathing Apparatus.HARNESS : Full Comfort Padding 3 carrying handles & 3 attachment points for life line with pulling resistance up to 150Kg. Shoulder straps and belt with fast adjustment buckle. Kevlar straps with Thermo Compressed Comfort Cushion . 2 reflective straps on front side of the shoulder cushion. Easy and quick adjustable cam lock device to secure any type of cylinder strap tightening. High Pressure Gauge and Whistle Alarm: Fixed close to the ear on the left shoulder strap. Alarm is integrated in the High Pressure Gauge Handle and is supplied with Medium Pressure to save maximum air (< to 5 litres), highly powerful (90dB / 3000 Hz at 1m) . The whistle is triggered at 55 bars +/- 5 bars. Approval : The AERIS certified as per European Standard EN 137- EN 136 . |
| Survivair Puma |
 Make sure facial hair and eyewear don’t get between workers and safety with the Survivair Puma. It provides a safe, comfortable fit so workers won’t have to shave or give up their regular street glasses for a spectacles kit. |
| Survivair Cougar |
 The Cougar’s first-stage regulator has a new, larger stainless steel CGA handwheel for fast, easy cylinder replacement. It attaches directly to the cylinder valve, eliminating the need for a high pressure hose. |
| Airmax with TLPredator 2400 |
 Removable and rechargeable Li-ion battery. PRSL filter. Quick Charge- only 4 hrs. Flow rate 180 Litres per minute for 9= hrs. Only 936G. Noise Level: 62D BA. Proban hose cover and belt. Suitable for TL Predator, Tl MV and TL V. Conforms to EN 12941 |
